%% 
%% Begining of file `table.tex'

%% This complex but short example prepared in the deluxetable environment 
%% demonstrates some of the techniques 
%% that can be used to generate complex column headings and to align 
%% variable-width columns. See the manuscript sample file, sample.tex, 
%% for more table examples.

%% Note this file has its own \documentclass, \begin{document}, and
%% \end{document} commands. If you want to insert this table in another 
%% LaTeX document using the \input command, comment out these lines.

\documentclass{aastex}
\begin{document}

%% Note that the table will print double-spaced since we are using the
%% manuscript style. Change the style to preprint or preprint2 to see 
%% how LaTeX formats the table in those styles.

%% In this example the LaTeX \multicolumn command is used to span a heading 
%% over several columns.  When \multicolumn is used along with the 
%% \cutinhead or \sidehead commands, the \tablecolumns command must 
%% be used to specify the number of columns in the table - 
%% otherwise \cutinhead and \sidehead will not work properly. 
 
%% \cline has been used to produce straddle rules below the spanning heads, 
%% \cutinhead to produce a centered head in the body of the table, and 
%% \sidehead to produce a flush-left head in the body.

%% This table also makes use of the \phn command to better align some of the 
%% columns.  Also see \phd, \phs, and \phm{} - other commands useful for 
%% column alignment.  All of these commands insert a blank space 
%% whose width is  equal to that of a number (\phn), 
%% a decimal point (\phd), a minus sign (\phs), or any 
%% character you wish to use (\phm{text}). 
%% Keep in mind that if you are preparing a table for electronic submission 
%% to one of the journals, you need not worry too much about column 
%% alignment. The editors will fix table alignment as appropriate.

%% If a table is more than one page long, the width of the table can vary 
%% from page to page when the default \tablewidth is used, as below.  The 
%% individual table widths for each page will be written to the log file; a 
%% maximum tablewidth for the table can be computed from these values. 
%% The \tablewidth argument can then be reset and the file reprocessed, so 
%% that the table is uniform throughout the pages. Try getting the widths
%% from the log file and changing the \tablewidth parameter to see how 
%% adjusting this value affects table formatting.

%% The * option to the \\ command has been used in the lines after 
%% the \sidehead to keep them together on the same page. Try taking 
%% the *'s out and LaTeXing the manuscript again to see the difference 
%% in the page breaks. You can group together as many lines as 
%% you like using this command. 


\begin{deluxetable}{rrrrrrrr} 
\tablecolumns{8} 
\tablewidth{0pc} 
\tablecaption{Percentage of Fake Stars Lost} 
\tablehead{ 
\colhead{}    &  \multicolumn{3}{c}{Non-shell Stars} &   \colhead{}   & 
\multicolumn{3}{c}{Shell Stars} \\ 
\cline{2-4} \cline{6-8} \\ 
\colhead{Mag} & \colhead{F336W}   & \colhead{F555W}    & \colhead{F814W} & 
\colhead{}    & \colhead{F336W}   & \colhead{F555W}    & \colhead{F814W}}
\startdata 
20.25 & 2.2$\pm$7.4\phn & \nodata & \nodata & 
& 0.9$\pm$6.8 & \nodata & 0.0$\pm$44.7 \\ 
20.75 & 2.4$\pm$7.8\phn & \nodata & 2.8$\pm$7.4 & 
& 1.7$\pm$6.6 & \nodata & 1.4$\pm$6.7\phn \\ 
21.25 & 0.1$\pm$7.7\phn & \nodata & 1.7$\pm$7.6 & 
& 2.6$\pm$6.5 & \nodata & 0.9$\pm$6.6\phn \\ 
21.75 & 2.4$\pm$4.5\phn & 2.2$\pm$7.4 & 0.1$\pm$7.6 & 
& 7.1$\pm$4.5 & 0.9$\pm$6.8 & 3.3$\pm$6.5\phn \\ 
22.25 & 3.4$\pm$3.1\phn & 1.8$\pm$7.7 & 2.9$\pm$4.4 & 
& 11.8$\pm$3.6 & 0.4$\pm$6.6 & 5.7$\pm$4.4\phn \\ 
22.75 & 4.5$\pm$2.9\phn & 1.8$\pm$7.7 & 4.7$\pm$3.1 & 
& 26.2$\pm$3.6 & 3.4$\pm$6.5 & 10.9$\pm$3.6\phn \\ 
23.25 & 7.0$\pm$2.4\phn & 3.4$\pm$4.5 & 3.7$\pm$2.9 & 
& 44.2$\pm$3.3 & 10.7$\pm$4.5 & 20.6$\pm$3.5\phn \\ 
\cutinhead{More Data} 
23.75 & 12.4$\pm$2.7\phn & 4.1$\pm$3.1 & 6.7$\pm$2.5 & 
& 59.8$\pm$4.0 & 20.1$\pm$3.6 & 32.6$\pm$3.4\phn \\ 
24.25 & 30.2$\pm$3.1\phn & 5.3$\pm$2.9 & 10.0$\pm$2.7 & 
& 74.9$\pm$5.1 & 35.8$\pm$3.6 & 43.1$\pm$4.0\phn \\ 
24.75 & 66.8$\pm$5.5\phn & 10.4$\pm$2.4 & 16.5$\pm$3.2 & 
& 83.7$\pm$6.1 & 56.3$\pm$3.3 & 57.0$\pm$5.2\phn \\ 
25.25 & 87.5$\pm$35.4 & 20.0$\pm$2.7 & 28.0$\pm$5.6 & 
& \nodata & 71.5$\pm$4.0 & 71.8$\pm$6.2\phn \\ 
25.75 & \nodata\phn & 55.3$\pm$3.1 & \nodata & 
& \nodata & 81.2$\pm$5.1 & \nodata\phn \\
26.25 & \nodata\phn & 85.1$\pm$5.5 & \nodata & 
& \nodata & 85.6$\pm$6.1 & \nodata\phn \\
\sidehead{More Data}
27.75 & 12.4$\pm$2.7\phn & 4.1$\pm$3.1 & 6.7$\pm$2.5 & 
& 59.8$\pm$4.0 & 20.1$\pm$3.6 & 32.6$\pm$3.4\phn \\*
28.25 & 30.2$\pm$3.1\phn & 5.3$\pm$2.9 & 10.0$\pm$2.7 & 
& 74.9$\pm$5.1 & 35.8$\pm$3.6 & 43.1$\pm$4.0\phn \\* 
29.75 & 66.8$\pm$5.5\phn & 10.4$\pm$2.4 & 16.5$\pm$3.2 & 
& 83.7$\pm$6.1 & 56.3$\pm$3.3 & 57.0$\pm$5.2\phn \\ 
30.25 & 87.5$\pm$35.4 & 20.0$\pm$2.7 & 28.0$\pm$5.6 & 
& \nodata & 71.5$\pm$4.0 & 71.8$\pm$6.2\phn \\ 
31.75 & \nodata\phn & 55.3$\pm$3.1 & \nodata & 
& \nodata & 81.2$\pm$5.1 & \nodata\phn \\ 
32.25 & \nodata\phn & 85.1$\pm$5.5 & \nodata & 
& \nodata & 85.6$\pm$6.1 & \nodata\phn \\ 
33.75 & 12.4$\pm$2.7\phn & 4.1$\pm$3.1 & 6.7$\pm$2.5 & 
& 59.8$\pm$4.0 & 20.1$\pm$3.6 & 32.6$\pm$3.4\phn \\ 
34.25 & 30.2$\pm$3.1\phn & 5.3$\pm$2.9 & 10.0$\pm$2.7 & 
& 74.9$\pm$5.1 & 35.8$\pm$3.6 & 43.1$\pm$4.0\phn \\ 
35.75 & 66.8$\pm$5.5\phn & 10.4$\pm$2.4 & 16.5$\pm$3.2 & 
& 83.7$\pm$6.1 & 56.3$\pm$3.3 & 57.0$\pm$5.2\phn \\ 
36.25 & 87.5$\pm$35.4 & 20.0$\pm$2.7 & 28.0$\pm$5.6 & 
& \nodata & 71.5$\pm$4.0 & 71.8$\pm$6.2\phn \\ 
37.75 & \nodata\phn & 55.3$\pm$3.1 & \nodata & 
& \nodata & 81.2$\pm$5.1 & \nodata\phn \\
38.25 & \nodata\phn & 85.1$\pm$5.5 & \nodata & 
& \nodata & 85.6$\pm$6.1 & \nodata\phn \\
\enddata 
\end{deluxetable} 

 \end{document}

%% 
%% End of file `table.tex'.